Painting Laminated Mdf Cabinets: A Step-By-Step Guide

How to paint laminate mdf kitchen cupboards, work space makeover from www.pinterest.com

Introduction

If you are looking to give your kitchen or bathroom cabinets a fresh new look, painting them is a great option. However, if your cabinets are made of laminated MDF, you may be wondering if it is possible to paint them. The good news is that it is possible, and in this article, we will guide you through the process.

Materials You Will Need

Before you get started, there are some materials you will need. These include:

• Paint
• Primer
• Sandpaper (220-grit)
• Tack cloth
• Painter's tape
• Paintbrushes
• Roller and tray
• Drop cloth or newspaper

Step-by-Step Guide

Step 1: Remove Cabinet Doors and Hardware

Start by removing the cabinet doors and hardware. This will make it easier to paint the cabinets and ensure that you get a smooth finish. Label each door and its corresponding hardware so that you can easily put them back in the right place.

Step 2: Clean the Cabinets

Use a mild detergent and warm water to clean the cabinets thoroughly. Make sure that you remove any grease, dirt, or grime. Allow the cabinets to dry completely before moving on to the next step.

Step 3: Sand the Cabinets

Use 220-grit sandpaper to sand the cabinets lightly. This will help the primer and paint adhere better to the surface. Make sure that you sand evenly and remove any dust with a tack cloth.

Step 4: Apply Primer

Apply a coat of primer to the cabinets using a brush or roller. Make sure that you cover all the surfaces evenly. Allow the primer to dry completely before moving on to the next step.

Step 5: Sand the Cabinets Again

Once the primer has dried, use 220-grit sandpaper to sand the cabinets lightly again. This will help to smooth out any rough spots and ensure that the surface is ready for painting.

Step 6: Apply Paint

Apply a coat of paint to the cabinets using a brush or roller. Make sure that you cover all surfaces evenly and allow the paint to dry completely before applying a second coat.

Step 7: Apply Second Coat of Paint

Once the first coat of paint has dried, apply a second coat using the same method as before. This will ensure that the cabinets are fully covered and have a smooth finish.

Step 8: Reattach Cabinet Doors and Hardware

Once the paint has dried completely, reattach the cabinet doors and hardware. Make sure that you put them back in the correct location.

Step 9: Clean Up

Clean up any paint drips or spills using a damp cloth. Dispose of any used materials properly.

Step 10: Enjoy Your New Cabinets

Now that your cabinets are painted, sit back and enjoy your new look. You have successfully painted your laminated MDF cabinets!

Conclusion

Painting laminated MDF cabinets can seem like a daunting task, but with the right materials and a little bit of patience, it is possible to achieve a beautiful finish. Remember to take your time, follow the steps carefully, and enjoy the process of transforming your cabinets.

Source: www.pinterest.com

Source: www.daintydressdiaries.com

Source: www.kylieminteriors.ca